KnowHow

Processes For Growing Restoration Companies

When removing of base and trim, it is important to do it carefully as often times it can be salvaged.&nbsp;

Remove Baseboard

Following are tools needed to properly remove base/trim
<ul>
<li>Razor blade knife</li>
<li>Thin putty knife</li>
<li>Hammer</li>
<li>Pry Bar</li>
<li>Wood Block</li>
</ul>
<figure><img style="width: 100%; display: block; margin: auto;" src="https://d1d4x9xaxq9e85.cloudfront.net/image/draftjs/81e6e4cb-e553-4a89-9acb-17bb955e26c5.jfif">&nbsp;</figure>
<figure><img style="width: 100%; display: block; margin: auto;" src="https://d1d4x9xaxq9e85.cloudfront.net/image/draftjs/c4841f9c-d871-4d32-a7a9-0f195cbbcf49.jfif"> <img style="width: 100%; display: block; margin: auto;" src="https://d1d4x9xaxq9e85.cloudfront.net/image/draftjs/d57e5a47-529f-4aa5-a94a-61cfec6bdb2f.jfif">&nbsp;</figure>
&nbsp;

Tools needed

Use the razor knife to score the top of the trim&nbsp;
<ul>
<li>Spend a lot of time on this to make sure the base is separated from the wall</li>
<li>Move carefully so the knife doesn't jump up and mark the wall.</li>
</ul>
<figure><img style="width: 100%; display: block; margin: auto;" src="https://d1d4x9xaxq9e85.cloudfront.net/image/draftjs/efca3f9b-2fc2-42d3-95f6-3534cfb2b26f.jfif">&nbsp;</figure>
&nbsp;

Score the caulk

If possible, start at an outside corner.
<ul>
<li>It's easier to open the joint vs an inside corner.</li>
</ul>
<figure><img style="width: 100%; display: block; margin: auto;" src="https://d1d4x9xaxq9e85.cloudfront.net/image/draftjs/89acd994-f827-4df0-aab1-91d3042f6b88.jfif">&nbsp;</figure>
&nbsp;

Start at an outside corner

Many times there is Quarter Round (shoe Molding) at the bottom of the base.
This needs to be removed first:
<ul>
<li>Use a thin putty knife and place behind the Shoe molding</li>
<li>Tap with a hammer to separate from the Base&nbsp;</li>
<li>Use a Pry bar with the wood block against the wall to pry away from the Base</li>
</ul>
<figure><img style="width: 100%; display: block; margin: auto;" src="https://d1d4x9xaxq9e85.cloudfront.net/image/draftjs/a26a690a-b746-4df1-a5e2-c31b06362011.jfif">&nbsp;</figure>
&nbsp;

Remove Quarter Round/Shoe Molding

Remove the Base from the wall:
<ul>
<li>Double check the scoring to make sure it is separated from the wall</li>
<li>Use a thin putty knife and place behind the Base and reassure the Caulk is clear</li>
<li>Between the Base and the wall, Place a prybar with a wood block behind it&nbsp;</li>
<li>Tap with a hammer to separate the Base from the wall</li>
<li>If the Base was installed before the floor, you may have to pry up on the base slightly to free it</li>
</ul>
<figure><img style="width: 100%; display: block; margin: auto;" src="https://d1d4x9xaxq9e85.cloudfront.net/image/draftjs/f9d78546-6d73-4115-a5eb-f7c9cd8a9102.jfif">&nbsp;</figure>
They do have some Base/Trim pullers on the market that can help make the removal a little easier:
<figure><img style="width: 100%; display: block; margin: auto;" src="https://d1d4x9xaxq9e85.cloudfront.net/image/draftjs/7fa6bf9d-1173-4dca-bf85-88e48aef93b0.jfif">&nbsp;</figure>
&nbsp;

Remove the Base

Baseboard can usually be salvaged, however, in the case of Cat 3 mitigations, it must be discarded.
When salvaging the baseboard, label the back of each board as it is removed.
<ul>
<li>Assign a letter to the room (ex. R = Rec Room; K = Kitchen, L= Living Room)</li>
<li>Then number each board as it's removed (1, 2, 3).</li>
</ul>
This means if board is mixed up when stored, you can gather all the letters together, then lay out the numbers to determine the order in which they are reinstalled.
Use a pencil to label the wall with the matching code.
<ul>
<li>In the space where the board was removed, pencil in the code that you wrote on the board.
<ul>
<li>Ex. R2</li>
</ul>
</li>
</ul>

If baseboard is being salvaged - Label each board & wall

If board is being salvaged pull out all nails before taking to storage.
<ul>
<li>Pull all nails from walls to avoid items/future flooring from being damaged.</li>
</ul>

If baseboard is being salvaged - Remove nails from board and wall

Wrap together the baseboard from each room (as possible - multiple bundles may be required).
<ul>
<li>Label each bundle with the full room name with a piece of blue tape.</li>
<li>Store in a safe and dry area.</li>
</ul>